Wireless Controlled Light Dimmer
When you switch the power on there will follow a soft-start till the lamp burns at the previously adjusted dim level. With the ’0′ button in TV mode you can dim the lamp, turn more and less bright. The remote control should send more then one RC5-signal per button-press seeing that the first one is [...]
Analog and Digital Circuits for Electronic Control
Book Description Todays control system designers face an ever-increasing need for speed and accuracy in their system measurements and computations. New design approaches using microcontrollers and DSP are emerging, and designers must understand these new approaches, the tools available, and how best to apply them. This practical text covers the latest techniques in microcontroller-based control [...]
SD Memory Card Interface
SD memory cards, especially the ones under 1GB are cheap, relatively easy to interface and provide vast amounts of memory for imbedded control. The Hardware SD sockets are available from SparkFun Electronics. The socket needs to be surface mounted so it was placed on the foil side of the single sided board (mouseover image above [...]
Infrared remote control receiver
The circuit consists of ordinary components (except of ATtiny13 in some cases). The IC1 is an infrared receiver at 30 kHz. The T2 makes the switch On/Off of Media Center when it gets a High level by IC2. The K2 is connected at the “power switch” connector of your PC’s mainboard (motherboard). The two diodes [...]
About us
