USB AVR ISP Programmer
Parts List:
| Description | QTY |
| Atmel ATMEGA8-16PI | 1 |
| 74HC126N Quad Buffer | 1 |
| 12 MHz Crystal HC49/US | 1 |
| 28 pin IC socket | 1 |
| 14 pin IC socket (optional) | 1 |
| Resistor Carbon Film 68 Ohm 1/4 Watt 10% | 2 |
| Resistor Carbon Film 270 Ohm 1/4 Watt 10% | 1 |
| Resistor Carbon Film 1K Ohm 1/4 Watt 10% | 2 |
| Resistor Carbon Film 10K Ohm 1/4 Watt 10% | 5 |
| Resistor Carbon Film 2K2 Ohm 1/4 Watt 10% | 1 |
| Resistor Carbon Film 22K Ohm 1/4 Watt 10% | 1 |
| Resistor Carbon Film 33K Ohm 1/4 Watt 10% | 1 |
| Ceramic Radial Capacitor 22pF 50V 5% | 2 |
| Ceramic Radial Capacitor .01uF 50V 10% | 2 |
| Electrolytic Radial Capacitor 4.7uF 16V 20% | 1 |
| 3.6 Volt Low Power Zener Diode | 2 |
| 5×2 Pin Gold Straight Header .100″ | 1 |
| 2 x 1 Pin Gold Straight Header .100″ | 3 |
| Shunt .100″ | 3 |
| Red LED | 1 |
| USB Connector | 1 |
| Single-sided Copper Clad Board 1 oz. 3.5″ x 2.125″ | 1 |
| Altoids 50g Tin | 1 |
Here is the pinout for the 10 pin ISP jack.
Source: Rototron
