Amplifier 200W – The Leach amp

This article descripts, how I built amplifier from Mr. Marshall Leach known like “The Leach Amp”. I built amplifier from the original instructions on these pages: Article about bulding of this amplifier I found later in journal A_Radio Praktická elektronika 11/2002. For many years I looked for construction of HiFi amplifier wit a good parameters, enough power reserve and simple construction. I built a couple of amplifiers with integrated circuits MBA810, TDA2005, LM3886, but I was disappointed by their output quality and noise. I decide to built a classic construction with discrete components and bipolar transistors. Construction from Mr. Dudek was interesting, but I didn’t like used components and complexity. All of my requirements satisfied construction of the Leach Amp. Circuit author publicates in a February 1976 in american journal. From these days circuit was not practically changed. Little changes are descripted on authors page.

I succeeded to find almost all original components on our local market, which was a miracle. Only a bigger problem was a power transformer and filter capacitors. Recommended toroid transformer for power 200W to 4 ohms is 230V/2x 42V.

Source: Pavouk

123pcb amplifier in eagle

Leave a Reply