Repairing LCD Monitor AG Neovo

Today we start with a new category called a "Repairing Section"and start with something easy:), changing the inverter board on LCD Monitor AG Neovo E-19A.The problem was that the monitor turns off after 2 seconds. I want to say that the inverter board did not roll CCFL transformer, so I could not find the original CCFL transformer, so I decided to put a new inverter. Inverter I found on ebay and I changed it and now here it is. I hope that surely some of you have and who is dealing with the servicing of LCD Monitors.

 

CCFL 4 Lamp Universal Inverter Board

P1060264

P1060265  P1060266 P1060267 P1060268 P1060270 P1060271

P1060273

7 Comments

  1. Terrykham April 28, 2011 4:53 am 

    Damed!!! Mine never work. In fact it got worst than before.

  2. Chris 0798 May 23, 2011 9:28 pm 

    I’m newbie, trying to replace inverter for my  old neovo E-19A monitor, the same one. I orderred the same inverter. What wires go to where? From my new CCFL 4 lamp universal inverter, i have one black, two yellows, one red. 
    And what about the 4 wires on each sides? I thought It comes with adapter, but didn’t…. 

  3. Leonet1973 March 12, 2013 6:20 am 

    Can you tell me about diagram conection for the universal LCD inverter, I buy one but not have any manual or diagram.

  4. Ruth December 1, 2014 6:21 pm 

    thank you so much for this tip
    how do I know wich
    to order – there are some
    can you pleas advise me the one I should order ?

  5. Shaun December 3, 2014 2:32 pm 

    OK, Nice pictures but where are the details?
    What inverter did you buy?
    What are the wiring details?

    Please give us some more info, great subject though

  6. Viktor January 7, 2017 9:54 pm 

    No need new inverter. Repair old inverter 1$. Change capacitor 220mKFx25V and fuse 3,15A. The more you grow old lamp, the greater the charge current, and capacitors to heat up, breaks down and burns the fuse. This occurred after a 5-year 24/7. Sorry for my bad English.

Leave a Reply